Repotenciación y puesta en funcionamiento del sistema de control domótico para las instalaciones del edificio de la Carrera de Mantenimiento Industrial

Abstract

In the modular of the Industrial Maintenance Career there was a home automation system that, due to time and presence of failures in the components, it reached a state of deterioration. Therefore, its use was suspended within the modular, in order to get it back on the road, this system was rehabilitated. Thus, seeking to obtain better benefits in comfort, security, communication, energy savings, etc. As a first step, the level of home automation was evaluated, taking into account the three levels of home automation established by Spanish Home Automation Association. (CEDOM), level 1, level 2, level 3, reflecting as a result a building with no level of home automation. Through the physical analysis of the sensor and controller elements belonging to the system and thanks to the "initial technical state evaluation methodology" it is deduced that the pre-existing home automation system was at 60,11% operating efficiency where results are obtained unfavorable because the access systems, video surveillance system, alarm system and fire-fighting system were in a bad (M) and very bad (MM) technical state, respectively. With all the aforementioned background, the repowering of it was carried out. An analysis, selection and design of new alternatives of signal emitting and receiving elements was carried out, which, through intercommunication with each other, will carry out the pertinent activities. The results obtained can be evidenced both in the physical state of each of the elements or at a general level, since it reached 98,71% of operating efficiency, as well as the advantages that its use gives to the modular system. It is recommended that before any configuration, repair or maintenance of each of the systems, the operation and maintenance manual should be taken into account.