Diseño eléctrico, automatización y puesta en marcha del ascensor de la Facultad de Mecánica

Abstract

The electrical design, automation and commissioning of the elevator of the Faculty of Mechanical Engineering has been made. This elevator was implemented with the purpose of people with physical disability have easier access to the top floor of the building. For this electrical design an electrical supply was held from the transformer, which is located in the laboratory of Turbo Machinery until the terrace of the building of Mechanical Engineering where the machine room is. The power cable calculated previously has been selected that will feed the control panel and the engine, in this case the cable number 8 has been chosen, which served for the conduction of each of the power lines that will be carried by standards by 1 ½- inch pipeline. The automation of the elevator has the electronic board CEA15 programmed for its correct operation that has inputs and outputs that are in accordance with the characteristics of the project to be performed. All electrical installations were isolated with appropriate protection elements such as thermal relays, phase monitors, and grounding point, taking into account the use of appropriate materials and well-known brands, which ensure a protection to the electrical and electronic circuit. A maintenance plan has been developed; electrical, electronic and mechanical of all the components that form this active. Safety and accident prevention measures are included for people that use the elevator and for maintenance staff.