Optimización del sistema del tratamiento de agua potable cantón Tisaleo.

Abstract

Optimizing Treatment Plant Water Tisaleo Canton Municipal GAD did it to seek improvements in the system and thus provide better quality water to the district. The investigation was performed on physico-chemical and microbiological parameters for how to tackle the problems of the system and to formulate an appropriate solution; tests for determining the proper dosage of Polyvinyl Aluminum, these analyzes and tests could be performed in the Laboratory Technicians, School Science Review, Polytechnic School of Chimborazo is where I facilitated the use of equipment and reagents are also made determining the required parameters. Based on the performed analysis and engineering calculations and based on the Standard INEN 1108: 2006 second revision was reached that all parameters are within the permissible limits for drinking water achieved demonstrate the proper coagulant dosage using Polyvinyl Aluminum it still is 161 L / day for a design flow rate of 14 L / s, in base of the calculusof velocity gradient within this stage which was of 0.240s-1 and the total loss in the flocculation system being of 1.224x10-5 m, so a feasible solution to the main problem occurred within the treatment plant water. To allow proper operation of the system and improve the quality of water provided to the population of Canton Tisaleo implantation study and recommend their peers.