Diseño e implementación de un manual de procedimientos de trabajo seguro, evaluando con la Norma NTP 330, para la Subdirección de Talleres y Mantenimiento y la Dirección de Obras Públicas del GAD Municipal de Santo Domingo

Abstract

The objective of this degree work was to design and implement a manual of safe work procedures (SWP) in the Sub directorate of Workshops and Maintenance (SWM) and of the Public Works Directorate (PWD) of the GAD Municipal Government of Santo Domingo. For this purpose, the risks of the activities carried out in the different workstations were identified using the INSHT qualitative matrix, and then the activities where these risks were present were evaluated using the NTP 330 methodology. As a result, 65% of the total risks evaluated belonged to level I, 26% to level II, 6% to level III risks, and finally only 3% to level IV. Of this group, 63% corresponded to mechanical risks, 17% to physical risks, 11% to chemical risks, and 9% to psychosocial risks. The results showed the need for the generation and implementation of a PTS manual; thus the socialization of the document was carried out with the Occupational Health and Safety Sub-Directorate and the implementation of other corrective measures. It was concluded that the institution required the creation of a safe work procedures manual and the implementation of other measures such as the placement of preventive signage in the mechanical workshops, the provision of personal protective equipment, and the clearing of obstacles in the vulcanizing area. It is recommended to socialize the procedures considering biosafety measures and to increase the number of safety technicians in the institution for a correct verification of compliance with the generated document.