Implementación de un módulo de entrenamiento para instrumentación y acondicionamiento de señales emitidas por sensores de temperatura, velocidad, caudal y presión, en el Laboratorio de Control y Manipulación Automática.

Abstract

It carried out the implementation of a training module for instrumentation and conditioning of the signals emitted by temperature, pressure, flow and speed sensors. For the development of the project used industrial sensors and the Lab VIEW software linked to a card NI MyRIO 1900 which processes the information obtained by the implemented sensors. For this module, the analog signals were configured with a Pt100 and the pressure transducer through electronic components which were within the range of 1 to 5V; being the maximum operating voltage according to the card, but for the digital signals applied the incremental encoder and flowmeter that generate electrical pulses in “1" or "0" logical "on" or "off" giving as result: "truth or denial". Once the module was connected to the card NI MyRIO 1900, it made the programming by using LabVIEW software, and then with the readings obtained was possible to make the parametrization, besides the conditioning of the signals for a presentation that is easy to read in order to monitor the behavior of the signal and perform control of the module for instrumentation. It is concluded that the sensors used for the development of this module have a great application in the industrial field; that is why the signals emitted by them were considered to obtain results with greater precision. It is recommended to implement the signal conditioning in future research projects. At the same time, it is recommended to have basic knowledge for the manipulation of the elements used in the development of the present research.